Extrude to Cursor hotkey Ctrl-Shift-RMB will cause rotation setting of tool to be stuck #95808

New Issue

A · 2022-02-15T19:28:23+01:00

A commented

2022-02-15 19:28:23 +01:00

System Information
Operating system: Windows-10-10.0.22000-SP0 64 Bits
Graphics card: NVIDIA GeForce RTX 3050 Ti Laptop GPU/PCIe/SSE2 NVIDIA Corporation 4.5.0 NVIDIA 511.65

Blender Version
Broken: version: 3.0.1, branch: master, commit date: 2022-01-25 17:19, hash: dc2d180181

Short description of error
In Mesh mode and default Blender keybinds, Ctrl-RMB will extrude selected geometry to cursor. This is the keybind Extrude to Cursor or Add:
mesh.dupli_extrude_cursor.

Manual info here: https:*docs.blender.org/manual/en/latest/modeling/meshes/tools/extrude_cursor.html

There are two modes of use. Ctrl-RMB will extrude selected geometry but also rotate the original selection to make the extrusion more smooth. Ctrl-SHIFT-RMB will extrude selected geometry without rotating.

The bug is, when Ctrl-Shift-RMB is used to extrude without rotating, all future uses of Ctrl-RMB will no longer rotate. The Shift non-rotation becomes stuck until the program restarts.

Exact steps for others to reproduce the error

Open default blender installation, Blender default keybinds, etc.
Select the cube and enter edit mode, press 2 to activate edge-select.
Correct behavior: Select an edge of the cube and Ctrl-RMB to extrude new face. The last-selected edge will rotate slightly depending on where you extruded.
Correct behavior: Extrude again, but use Ctrl-Shift-RMB. The last-selected edge will not rotate, which is normal.
Bug behavior: Let go of all hotkeys. Extrude using Ctrl-RMB. The last-selected edge will still not rotate, despite not using the Shift modifier.
The buggy behavior stops upon restarting Blender.

**System Information** Operating system: Windows-10-10.0.22000-SP0 64 Bits Graphics card: NVIDIA GeForce RTX 3050 Ti Laptop GPU/PCIe/SSE2 NVIDIA Corporation 4.5.0 NVIDIA 511.65 **Blender Version** Broken: version: 3.0.1, branch: master, commit date: 2022-01-25 17:19, hash: `dc2d180181` **Short description of error** In Mesh mode and default Blender keybinds, Ctrl-RMB will extrude selected geometry to cursor. This is the keybind Extrude to Cursor or Add: mesh.dupli_extrude_cursor. Manual info here: [https:*docs.blender.org/manual/en/latest/modeling/meshes/tools/extrude_cursor.html ](https:*docs.blender.org/manual/en/latest/modeling/meshes/tools/extrude_cursor.html) There are two modes of use. Ctrl-RMB will extrude selected geometry but also rotate the original selection to make the extrusion more smooth. Ctrl-**SHIFT**-RMB will extrude selected geometry without rotating. **The bug is, when Ctrl-Shift-RMB is used to extrude without rotating, all future uses of Ctrl-RMB will no longer rotate. The Shift non-rotation becomes stuck until the program restarts.** **Exact steps for others to reproduce the error** - Open default blender installation, Blender default keybinds, etc. - Select the cube and enter edit mode, press 2 to activate edge-select. - Correct behavior: Select an edge of the cube and Ctrl-RMB to extrude new face. The last-selected edge will rotate slightly depending on where you extruded. - Correct behavior: Extrude again, but use Ctrl-Shift-RMB. The last-selected edge will not rotate, which is normal. - Bug behavior: Let go of all hotkeys. Extrude using Ctrl-RMB. The last-selected edge will still not rotate, despite not using the Shift modifier. - The buggy behavior stops upon restarting Blender.

A commented

2022-02-15 19:28:23 +01:00

Added subscriber: @breathlessblizz

Pratik Borhade commented

2022-02-16 02:58:01 +01:00

Added subscriber: @PratikPB2123

Pratik Borhade commented

2022-02-16 02:58:01 +01:00

Changed status from 'Needs Triage' to: 'Needs User Info'

Pratik Borhade commented

2022-02-16 02:58:01 +01:00

Hi, thanks for the report. Can not reproduce actually on both 3.0.0 and current master.
Not sure but I suspect your changes in keymap might have caused this.
Can you check with factory settings?: https://builder.blender.org/download/daily
If that doesn't help please upload screen recording.

Hi, thanks for the report. Can not reproduce actually on both 3.0.0 and current master. Not sure but I suspect your changes in keymap might have caused this. Can you check with factory settings?: https://builder.blender.org/download/daily If that doesn't help please upload screen recording.

A commented

2022-02-16 21:14:05 +01:00

Hmm, you're right. Could not reproduce on version: 3.1.0 Beta, branch: master, commit date: 2022-02-15 19:40, hash: 53fe4f62fe

I am using a modified version of the Industry Compatible hotkey set, and was trying to add the functionality in by copying the hotkeys from the standard Blender keymap. I must have made an error somewhere, although I'm not sure how.

Hmm, you're right. Could not reproduce on version: 3.1.0 Beta, branch: master, commit date: 2022-02-15 19:40, hash: `53fe4f62fe` I am using a modified version of the Industry Compatible hotkey set, and was trying to add the functionality in by copying the hotkeys from the standard Blender keymap. I must have made an error somewhere, although I'm not sure how.

Pratik Borhade commented

2022-02-17 02:25:57 +01:00

Changed status from 'Needs User Info' to: 'Archived'

Pratik Borhade closed this issue

2022-02-17 02:25:57 +01:00

Pratik Borhade commented

2022-02-17 02:25:57 +01:00

Hi, thanks for the update. Will close if you can't reproduce anymore.

Feel free to comment or reopen the ticket if issue reappears. Thanks again for the report!

Hi, thanks for the update. Will close if you can't reproduce anymore. Feel free to comment or reopen the ticket if issue reappears. Thanks again for the report!

Sign in to join this conversation.

No Label

Download

What's New

Blender Studio

Manual

Developers Blog

Documentation

Benchmark

Blender Conference

Development Fund

One-time Donations

Extrude to Cursor hotkey Ctrl-Shift-RMB will cause rotation setting of tool to be stuck #95808