Hard to link nodes #58342

New Issue

Thomas Armour · 2018-11-30T18:16:17+01:00

Thomas Armour commented

2018-11-30 18:16:17 +01:00

System Information
Host: oakenstone Kernel: 4.19.4-1-MANJARO x86_64 bits: 64 compiler: gcc

v: 8.2.1 Desktop: N/A wm: xfwm4 dm: LightDM Distro: Manjaro Linux

Machine:

Type: Desktop Mobo: Micro-Star model: B350 TOMAHAWK ARCTIC (MS-7A34) 
v: 3.0 serial: <root required> UEFI: American Megatrends v: H.40 
date: 05/10/2017

Memory:

RAM: total: 15.68 GiB used: 3.88 GiB (24.8%) 
RAM Report: permissions: Unable to run dmidecode. Are you root?

CPU:

Topology: 8-Core model: AMD Ryzen 7 1700 bits: 64 type: MT MCP arch: Zen 
rev: 1 L2 cache: 4096 KiB 
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm 
bogomips: 96039 
Speed: 3213 MHz min/max: N/A Core speeds (MHz): 1: 3213 2: 3197 3: 3215

4: 3180 5: 3206 6: 3195 7: 3194 8: 3199 9: 3200 10: 3198 11: 3199 12: 3204
13: 3200 14: 3187 15: 3160 16: 3202
Graphics:

Device-1: NVIDIA GM200 [GeForce GTX 980 Ti] vendor: Micro-Star MSI 
driver: nvidia v: 410.78 bus ID: 23:00.0 chip ID: 10de:17c8 
Display: x11 server: X.Org 1.20.3 driver: nvidia 
resolution: 1600x900~60Hz, 1920x1080~60Hz 
OpenGL: renderer: GeForce GTX 980 Ti/PCIe/SSE2 v: 4.6.0 NVIDIA 410.78 
direct render: Yes

Audio:

Device-1: NVIDIA GM200 High Definition Audio vendor: Micro-Star MSI 
driver: snd_hda_intel v: kernel bus ID: 23:00.1 chip ID: 10de:0fb0 
Device-2: AMD Family 17h HD Audio vendor: Micro-Star MSI 
driver: snd_hda_intel v: kernel bus ID: 25:00.3 chip ID: 1022:1457 
Sound Server: ALSA v: k4.19.4-1-MANJARO

Network:

Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet 
vendor: Micro-Star MSI driver: r8168 v: 8.045.08-NAPI port: f000 
bus ID: 21:00.0 chip ID: 10ec:8168 
IF: enp33s0 state: up speed: 1000 Mbps duplex: full mac: 30:9c:23:1b:40:ea

Drives:

Local Storage: total: 9.67 TiB used: 4.75 TiB (49.1%) 
ID-1: /dev/sda type: USB vendor: Seagate model: Backup+ Desk 
size: 3.64 TiB serial: NA7DAANC 
ID-2: /dev/sdb type: USB vendor: Seagate model: Backup+ Hub BK 
size: 5.46 TiB serial: NA8TDLMT 
ID-3: /dev/sdc vendor: Western Digital model: WDBNCE5000PNC-WRSN 
size: 465.76 GiB speed: 6.0 Gb/s serial: 174255420985 
ID-4: /dev/sde type: USB vendor: Lexar model: USB Flash Drive 
size: 119.24 GiB serial: AAHXRX6RL11N5XEL 
Message: No Optical or Floppy data was found.

Partition:

ID-1: / size: 440.18 GiB used: 148.79 GiB (33.8%) fs: ext4 dev: /dev/sdc2 
label: N/A uuid: 2c4fc3c9-0f4c-448b-b52f-b07b025af27c 
ID-2: /boot/efi size: 299.4 MiB used: 264 KiB (0.1%) fs: vfat 
dev: /dev/sdc1 label: N/A uuid: 56E1-82B1 
ID-3: /mnt/Seagate Backup H size: 5.41 TiB used: 2.65 TiB (48.9%) fs: ext4 
dev: /dev/sdb1 label: Seagate Backup H 
uuid: 10142b44-c726-4847-a062-81d75ab525e9 
ID-4: /mnt/Seagatetwo size: 3.58 TiB used: 1.95 TiB (54.5%) fs: ext4 
dev: /dev/sda1 label: Seagatetwo 
uuid: b425f255-8edf-4ca0-8f3f-40d309e4a8e7 
ID-5: swap-1 size: 17.25 GiB used: 95.2 MiB (0.5%) fs: swap dev: /dev/sdc3 
label: N/A uuid: 879bfb16-f3d9-4828-b6d9-5f00f422764d

Unmounted:

ID-1: /dev/sde1 size: 119.24 GiB fs: vfat label: Lexar uuid: E163-1ED0

USB:

Hub: 1-0:1 info: Full speed (or root) Hub ports: 10 rev: 2.0 
chip ID: 1d6b:0002 
Hub: 1-9:2 info: VIA Labs VL812 Hub ports: 4 rev: 2.1 chip ID: 2109:2812 
Hub: 1-9.4:4 info: VIA Labs VL812 Hub ports: 4 rev: 2.1 chip ID: 2109:2812 
Device-1: 1-9.4.1:5 info: Lexar Media JumpDrive Tough type: Mass Storage 
driver: usb-storage rev: 2.1 chip ID: 05dc:a838 
Device-2: 1-9.4.2:6 info: Primax type: Mouse driver: hid-generic,usbhid 
rev: 2.0 chip ID: 0461:4de2 
Device-3: 1-9.4.3:7 info: Primax HP PR1101U / Primax PMX-KPR1101U Keyboard 
type: Keyboard,HID driver: hid-generic,usbhid rev: 1.1 chip ID: 0461:0010 
Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.1 
chip ID: 1d6b:0003 
Hub: 3-0:1 info: Full speed (or root) Hub ports: 4 rev: 2.0 
chip ID: 1d6b:0002 
Hub: 3-1:2 info: Seagate RSS LLC ports: 3 rev: 2.1 chip ID: 0bc2:ab44 
Hub: 4-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 
chip ID: 1d6b:0003 
Hub: 4-1:2 info: Seagate RSS LLC ports: 3 rev: 3.0 chip ID: 0bc2:ab45 
Device-4: 4-1.1:4 info: Seagate RSS LLC Backup Plus Hub type: Mass Storage 
driver: uas rev: 3.1 chip ID: 0bc2:ab38 
Device-5: 4-2:3 info: Seagate RSS LLC Backup Plus type: Mass Storage 
driver: uas rev: 3.0 chip ID: 0bc2:ab34

Sensors:

System Temperatures: cpu: 36.6 C mobo: N/A gpu: nvidia temp: 56 C 
Fan Speeds (RPM): N/A gpu: nvidia fan: 0%

Info:

Processes: 325 Uptime: 20h 07m Init: systemd v: 239 Compilers: gcc: 8.2.1 
Shell: bash v: 4.4.23 running in: xfce4-terminal inxi: 3.0.27

Blender Version
2.8

Short description of error
When trying to link nodes in node editor, it is very hard to connect. I mostly just draw a box outline instead of actually connecting the nodes. It's very fiddly.

**System Information** Host: oakenstone Kernel: 4.19.4-1-MANJARO x86_64 bits: 64 compiler: gcc ``` v: 8.2.1 Desktop: N/A wm: xfwm4 dm: LightDM Distro: Manjaro Linux ``` Machine: ``` Type: Desktop Mobo: Micro-Star model: B350 TOMAHAWK ARCTIC (MS-7A34) v: 3.0 serial: <root required> UEFI: American Megatrends v: H.40 date: 05/10/2017 ``` Memory: ``` RAM: total: 15.68 GiB used: 3.88 GiB (24.8%) RAM Report: permissions: Unable to run dmidecode. Are you root? ``` CPU: ``` Topology: 8-Core model: AMD Ryzen 7 1700 bits: 64 type: MT MCP arch: Zen rev: 1 L2 cache: 4096 KiB flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 sse4a ssse3 svm bogomips: 96039 Speed: 3213 MHz min/max: N/A Core speeds (MHz): 1: 3213 2: 3197 3: 3215 ``` 4: 3180 5: 3206 6: 3195 7: 3194 8: 3199 9: 3200 10: 3198 11: 3199 12: 3204 13: 3200 14: 3187 15: 3160 16: 3202 Graphics: ``` Device-1: NVIDIA GM200 [GeForce GTX 980 Ti] vendor: Micro-Star MSI driver: nvidia v: 410.78 bus ID: 23:00.0 chip ID: 10de:17c8 Display: x11 server: X.Org 1.20.3 driver: nvidia resolution: 1600x900~60Hz, 1920x1080~60Hz OpenGL: renderer: GeForce GTX 980 Ti/PCIe/SSE2 v: 4.6.0 NVIDIA 410.78 direct render: Yes ``` Audio: ``` Device-1: NVIDIA GM200 High Definition Audio vendor: Micro-Star MSI driver: snd_hda_intel v: kernel bus ID: 23:00.1 chip ID: 10de:0fb0 Device-2: AMD Family 17h HD Audio vendor: Micro-Star MSI driver: snd_hda_intel v: kernel bus ID: 25:00.3 chip ID: 1022:1457 Sound Server: ALSA v: k4.19.4-1-MANJARO ``` Network: ``` Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Micro-Star MSI driver: r8168 v: 8.045.08-NAPI port: f000 bus ID: 21:00.0 chip ID: 10ec:8168 IF: enp33s0 state: up speed: 1000 Mbps duplex: full mac: 30:9c:23:1b:40:ea ``` Drives: ``` Local Storage: total: 9.67 TiB used: 4.75 TiB (49.1%) ID-1: /dev/sda type: USB vendor: Seagate model: Backup+ Desk size: 3.64 TiB serial: NA7DAANC ID-2: /dev/sdb type: USB vendor: Seagate model: Backup+ Hub BK size: 5.46 TiB serial: NA8TDLMT ID-3: /dev/sdc vendor: Western Digital model: WDBNCE5000PNC-WRSN size: 465.76 GiB speed: 6.0 Gb/s serial: 174255420985 ID-4: /dev/sde type: USB vendor: Lexar model: USB Flash Drive size: 119.24 GiB serial: AAHXRX6RL11N5XEL Message: No Optical or Floppy data was found. ``` Partition: ``` ID-1: / size: 440.18 GiB used: 148.79 GiB (33.8%) fs: ext4 dev: /dev/sdc2 label: N/A uuid: 2c4fc3c9-0f4c-448b-b52f-b07b025af27c ID-2: /boot/efi size: 299.4 MiB used: 264 KiB (0.1%) fs: vfat dev: /dev/sdc1 label: N/A uuid: 56E1-82B1 ID-3: /mnt/Seagate Backup H size: 5.41 TiB used: 2.65 TiB (48.9%) fs: ext4 dev: /dev/sdb1 label: Seagate Backup H uuid: 10142b44-c726-4847-a062-81d75ab525e9 ID-4: /mnt/Seagatetwo size: 3.58 TiB used: 1.95 TiB (54.5%) fs: ext4 dev: /dev/sda1 label: Seagatetwo uuid: b425f255-8edf-4ca0-8f3f-40d309e4a8e7 ID-5: swap-1 size: 17.25 GiB used: 95.2 MiB (0.5%) fs: swap dev: /dev/sdc3 label: N/A uuid: 879bfb16-f3d9-4828-b6d9-5f00f422764d ``` Unmounted: ``` ID-1: /dev/sde1 size: 119.24 GiB fs: vfat label: Lexar uuid: E163-1ED0 ``` USB: ``` Hub: 1-0:1 info: Full speed (or root) Hub ports: 10 rev: 2.0 chip ID: 1d6b:0002 Hub: 1-9:2 info: VIA Labs VL812 Hub ports: 4 rev: 2.1 chip ID: 2109:2812 Hub: 1-9.4:4 info: VIA Labs VL812 Hub ports: 4 rev: 2.1 chip ID: 2109:2812 Device-1: 1-9.4.1:5 info: Lexar Media JumpDrive Tough type: Mass Storage driver: usb-storage rev: 2.1 chip ID: 05dc:a838 Device-2: 1-9.4.2:6 info: Primax type: Mouse driver: hid-generic,usbhid rev: 2.0 chip ID: 0461:4de2 Device-3: 1-9.4.3:7 info: Primax HP PR1101U / Primax PMX-KPR1101U Keyboard type: Keyboard,HID driver: hid-generic,usbhid rev: 1.1 chip ID: 0461:0010 Hub: 2-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.1 chip ID: 1d6b:0003 Hub: 3-0:1 info: Full speed (or root) Hub ports: 4 rev: 2.0 chip ID: 1d6b:0002 Hub: 3-1:2 info: Seagate RSS LLC ports: 3 rev: 2.1 chip ID: 0bc2:ab44 Hub: 4-0:1 info: Full speed (or root) Hub ports: 4 rev: 3.0 chip ID: 1d6b:0003 Hub: 4-1:2 info: Seagate RSS LLC ports: 3 rev: 3.0 chip ID: 0bc2:ab45 Device-4: 4-1.1:4 info: Seagate RSS LLC Backup Plus Hub type: Mass Storage driver: uas rev: 3.1 chip ID: 0bc2:ab38 Device-5: 4-2:3 info: Seagate RSS LLC Backup Plus type: Mass Storage driver: uas rev: 3.0 chip ID: 0bc2:ab34 ``` Sensors: ``` System Temperatures: cpu: 36.6 C mobo: N/A gpu: nvidia temp: 56 C Fan Speeds (RPM): N/A gpu: nvidia fan: 0% ``` Info: ``` Processes: 325 Uptime: 20h 07m Init: systemd v: 239 Compilers: gcc: 8.2.1 Shell: bash v: 4.4.23 running in: xfce4-terminal inxi: 3.0.27 ``` **Blender Version** 2.8 **Short description of error** When trying to link nodes in node editor, it is very hard to connect. I mostly just draw a box outline instead of actually connecting the nodes. It's very fiddly.

Thomas Armour commented

2018-11-30 18:16:17 +01:00

Added subscriber: @oakenstone

Brecht Van Lommel commented

2018-11-30 18:17:09 +01:00

Closed as duplicate of #58267

Brecht Van Lommel closed this issue

2018-11-30 18:17:09 +01:00

Sign in to join this conversation.

No Label

Download

What's New

Blender Studio

Manual

Developers Blog

Documentation

Benchmark

Blender Conference

Development Fund

One-time Donations

Hard to link nodes #58342