Page MenuHome

A. Botos (AnnA_Ayms)
User

Projects

User does not belong to any projects.

User Details

User Since
Jan 29 2019, 12:39 AM (41 w, 3 d)

Recent Activity

Apr 6 2019

A. Botos (AnnA_Ayms) added a comment to T58938: Crash when using EEVEE and Intel HD 4000.

I just tested with blender-2.80-cc73d59ad580-win32

Apr 6 2019, 9:44 PM · BF Blender
A. Botos (AnnA_Ayms) added a comment to T60933: can't run blender 2.8 on my 32 bit windows 7 . It crashes .

I just tested with blender-2.80-cc73d59ad580-win32

Apr 6 2019, 9:11 PM · BF Blender

Mar 16 2019

A. Botos (AnnA_Ayms) added a comment to T60933: can't run blender 2.8 on my 32 bit windows 7 . It crashes .

I tested the other/mesa opengl32.dll nero1024 linked to on my Fujitsu t904 that I installed Win7 32-bit on but for me its issue/problem didn't change (still crashed on startup when compatibility mode is off) so at least in that case it is something else along with the driver. Although now with compatibility mode on even when it starts (hardware mode) the 3d viewport is purely black (on both 32 an 64 Win 7 intel Haswell graphics) so the graphics driver is also an issue but that issue doesn't result in a crash. On that same computer (Fujitsu t904) on the boot partition with Windows 10 64-bit blender loads fine. With the Win 7 boot partition and Compatibility Mode on and mesa opengl32.dll (software mode) the initial 3d viewport shows but Blender immediately freezes. The Windows 7 haswell intel drivers simply are no longer compatible with the newest builds of Blender 2.80. Although I do consider it reasonable if they are now longer supported, I just want to report/confirm my findings.

Mar 16 2019, 12:29 PM · BF Blender

Feb 26 2019

A. Botos (AnnA_Ayms) added a comment to T60933: can't run blender 2.8 on my 32 bit windows 7 . It crashes .

On the q584 now the error is "blender.exe - Application Error" "The application was unable to start correctly (0xc0000142). Click OK to close the application."

Feb 26 2019, 10:57 PM · BF Blender
A. Botos (AnnA_Ayms) added a comment to T60933: can't run blender 2.8 on my 32 bit windows 7 . It crashes .

On both the t904 running 32bit Win7 and the q584 Win8 32bit putting the opengl32.dll into the folder with blender-2.80-54ffc4e19dc4-win32 generates a similar error
"blender.exe - Bad Image" "(location ran from)\OPENGL32.dll is either not designed to run on Windows or it contains an error. Try installing the program again using the original installation media or contact your system administrator or the software vendor for support." Win8 adds "Error Status 0xc000035a."

Feb 26 2019, 10:22 PM · BF Blender
A. Botos (AnnA_Ayms) added a comment to T60933: can't run blender 2.8 on my 32 bit windows 7 . It crashes .

Yes, at least per my last test with February 25th 2019s blender-2.80-54ffc4e19dc4-win32 nothing is different from my last reported experiences/tests.

Feb 26 2019, 11:07 AM · BF Blender

Jan 30 2019

A. Botos (AnnA_Ayms) added a comment to T60933: can't run blender 2.8 on my 32 bit windows 7 . It crashes .

On the t904 both 32 bit and 64 bit Windows 7 I can get blender-2.80-957b4547aeeb-win32 to start without debug if I enable compatibility mode, even Windows 7 compatibility option in Windows 7 (?) but unlike the mention in T60089 I need to keep compatibility mode enabled as disabling it brings back the crashes.

Jan 30 2019, 10:31 AM · BF Blender
A. Botos (AnnA_Ayms) added a comment to T60933: can't run blender 2.8 on my 32 bit windows 7 . It crashes .

Just to clarify I'm not the original poster of this issue but unfortunately they haven't added anymore information about their case. I know and understand 32 bit isn't a priority and to my knowledge will be dropped in the next major update (2.81?) and personally am fine sticking with the January 7th build on the Q584. If there are others though that use the 32 bit build on Windows though I hope they report if it works for them or not.

Jan 30 2019, 7:59 AM · BF Blender
A. Botos (AnnA_Ayms) added a comment to T60933: can't run blender 2.8 on my 32 bit windows 7 . It crashes .

Also resetting the default file changed nothing.

Jan 30 2019, 1:54 AM · BF Blender
A. Botos (AnnA_Ayms) added a comment to T60933: can't run blender 2.8 on my 32 bit windows 7 . It crashes .

I'm fairly certain that either isn't it or at least isn't the only issue.
Just tested the blender-2.80-957b4547aeeb-win32 build on a HP Zbook X2 running Windows 10 64 bit which is set to run blender on its Nvidia Quadro M620 and when double clicking it wouldn't start, just like with the test on the Fujitsu t904.

Jan 30 2019, 1:52 AM · BF Blender
A. Botos (AnnA_Ayms) added a comment to T60933: can't run blender 2.8 on my 32 bit windows 7 . It crashes .

"Does the latest blender version work if you update your GPU drivers?"
No, win32_15.33.47.5059 which was the latest driver that supports this device that is on Intel's site is already installed.
I just tried blender-2.80-957b4547aeeb-win32 and no change:

Jan 30 2019, 12:31 AM · BF Blender

Jan 29 2019

A. Botos (AnnA_Ayms) added a comment to T60933: can't run blender 2.8 on my 32 bit windows 7 . It crashes .

The 2018-12-11 blender-2.80-d415b5c7b85-win32 also works but when closing the program it does generate a similar error message in the command prompt as January 7th's does when closing.

Jan 29 2019, 3:34 PM · BF Blender
A. Botos (AnnA_Ayms) added a comment to T60933: can't run blender 2.8 on my 32 bit windows 7 . It crashes .

Recent Windows Blender 2.80 32 bit builds also seem to be crashing on start up for me as well. Tested on 2 different computers one that has 32 bit Windows but does start the January 7th 2019 build of 2.80 without apparent issue and another that has 64 bit Windows and loads the same (January 26th build) 64 bit Blender 2.80 but the 32 bit build won't open unless through command prompt with --debug it seems.

Jan 29 2019, 1:05 AM · BF Blender
A. Botos (AnnA_Ayms) added a comment to T60932: can't run blender 2.8 on my 32 bit windows 7 . It crashes .
Jan 29 2019, 1:01 AM · BF Blender